[Tc(NO)(Cp)(PPh3)Cl] and [Tc(NO)(Cp)(PPh3)(NCCH3)](PF6), and Their Reactions with Pyridine and Chalcogen Donors.

Reactions of the technetium(I) nitrosyl complex [Tc(NO)(Cp)(PPh3)Cl] with triphenylphosphine chalcogenides EPPh3 (E = O, S, Se), and Ag(PF6) in a CH2Cl2/MeOH mixture (v/v, 2/1) result in an exchange of the chlorido ligand and the formation of [Tc(NO)(Cp)(PPh3)(EPPh3)](PF6) compounds. The cationic acetonitrile complex [Tc(NO)(Cp)(PPh3)(NCCH3)]+ is formed when the reaction is conducted in NCCH3 without additional ligands. During the isolation of the corresponding PF6- salt a gradual decomposition of the anion was detected in the solvent mixture applied. The yields and the purity of the product increase when the BF4- salt is used instead. The acetonitrile ligand is bound remarkably strongly to technetium and exchange reactions readily proceed only with strong donors, such as pyridine or ligands with 'soft' donor atoms, such as the thioether thioxane. Substitutions on the cyclopentadienyl ring do not significantly influence the ligand exchange behavior of the starting material. 99Tc NMR spectroscopy is a valuable tool for the evaluation of reactions of the complexes of the present study. The extremely large chemical shift range of this method allows the ready detection of corresponding ligand exchange reactions. The observed 99Tc chemical shifts depend on the donor properties of the ligands. DFT calculations support the discussions about the experimental results and provide explanations for some of the unusual findings.

Metallacages with 2,6-dipicolinoylbis(N,N-dialkylthioureas) as novel platforms in nuclear medicine for 68Ga, 177Lu and 198Au.

BACKGROUND: Heterometallic gold metallacages are of great interest for the incorporation of several cations. Especially in nuclear medicine, those metallacages can serve as a platform for radionuclides relevant for imaging or therapy (e.g. 68Ga or 177Lu). Moreover, the radionuclide 198Au is an attractive beta emitter, for potential application in nuclear medicine. Here, we aim to synthesize a new set of gold metallacages and to study their ability to coordinate to 68Ga, 177Lu and 198Au. RESULTS: New heterometallic gold metallacages of composition [M{Au(Lmorph-κS)}3] (M = La3+, Tb3+, Lu3+ or Y3+) and [Ga{Au(Lmorph-κS)}2]NO3 have been synthesized from 2,6-dipicolinoylbis(N,N-morpholinylthiourea) (H2Lmorph) with [AuCl(THT)] and the target M3+ metal ions in yields ranging from 33 (Lu) to 62% (Tb). The characterization of the compounds bases on ESI-MS, 1H NMR, IR, EA and single-crystal X-ray diffraction techniques (all except the Ga derivative). Selected gold cages derived from H2Lmorph were compared to previously reported gold cages that were derived from 2,6-dipicolinoylbis(N,N-diethylthiourea) (H2Ldiethyl). The tested metallacages show similar IC50 values close to that of auranofin in four different cancer cell lines (MCF-7, PC-3, U383, U343), e.g. 4.5 ± 0.7 µM for [Ga{Au(Ldiethyl)}2]NO3 on PC-3. The radiolabeling experiments thereof show high radiochemical purities with 68Ga and 198Au and low radiochemical purity with 177Lu. CONCLUSIONS: The results indicate that these gold metallacages could serve as a novel platform for inclusion of different (radio)nuclides with potential theranostic applications in nuclear medicine.

Technetium Complexes with an Isocyano-alkyne Ligand and Its Reaction Products.

The attachment of an ethyne substituent in the para position of phenylisocyanide, CNPhpC≡CH, enables the isocyanide to replace carbonyl ligands in the coordination sphere of common technetium(I) starting materials such as (NBu4)[Tc2(µ-Cl)3(CO)6]. The ligand exchange proceeds under thermal conditions and finally forms the corresponding hexakis(isocyanide)technetium(I) complex. The product undergoes a copper-catalyzed cycloaddition ("Click" reaction), e.g., with benzyl azide, which gives the [Tc(CNPhazole)6]+ cation. The free, uncoordinated "Click" product is obtained from a reaction of the corresponding tetrakis(CNPhazole)copper(I) complex and NaCN. It readily reacts with mer-[Tc(CO)3(tht)(PPh3)2](BF4) (tht = tetrahydrothiophene) under exchange of the thioether ligand. Alternatively, [Cu(CNPhazole)4]+ can be used as a transmetalation reagent for the synthesis of the hexakis(isocyanide)technetium(I) complex, which is the preferable approach for the synthesis of the technetium complex with the short-lived nuclear isomer 99mTc, and a corresponding protocol for [99mTc(CNPhazole)6]+ is reported. The 99Tc and copper complexes have been studied by single-crystal X-ray diffraction and/or spectroscopic methods including IR and multinuclear NMR spectroscopy.

Phenylimido complexes of rhenium: fluorine substituents provide protection, reactivity, and solubility.

Reactions of [Re(NPhF)Cl3(PPh3)2] ({NPhF}2- = p-fluorophenylimide) with a variety of alkyl and aryl isocyanides have been studied. Different reactivity patterns and products have been obtained depending on the steric and electronic properties of the individual ligands. This involves the formation of 1 : 1 and 1 : 2 exchange products of Re(V) with the general formulae mer-[Re(NPhF)Cl3(PPh3)(isocyanide)] and cis- or trans-[Re(NPhF)Cl3(isocyanide)2]. The stability of the obtained products is correlated with the substitution pattern of the isocyanide ligands. The products have been studied by single-crystal X-ray diffraction and spectroscopic methods, including IR and multinuclear NMR spectroscopy as well as mass spectrometry. The use of partially fluorinated starting materials and ligands allows the modulation of the solubilities of the starting materials and the products as well as the monitoring of the reactions by means of 19F NMR. The attachment of the CF3 or F substituent on the isocyanides gives control over the steric bulk and the electronic properties of the ligands and, thus, their reactivity.

The Chemistry of Phenylimidotechnetium(V) Complexes with Isocyanides: Steric and Electronic Factors.

Organometallic approaches are of ongoing interest for the development of novel functional 99mTc radiopharmaceuticals, while the basic organotechnetium chemistry seems frequently to be little explored. Thus, structural and reactivity studies with the long-lived isotope 99Tc are of permanent interest as the foundation for further progress in the related radiopharmaceutical research with this artificial element. Particularly the knowledge about the organometallic chemistry of high-valent technetium compounds is scarcely developed. Here, phenylimido complexes of technetium(V) with different isocyanides are introduced. They have been synthesized by ligand-exchange procedures starting from [Tc(NPh)Cl3(PPh3)2]. Different reactivity patterns and products have been obtained depending on the steric and electronic properties of the individual ligands. This involves the formation of 1:1 and 1:2 exchange products of Tc(V) with the general formulae [Tc(NPh)Cl3(PPh3)(isocyanide)], cis- or trans-[Tc(NPh)Cl3(isocyanide)2], but also the reduction in the metal and the formation of cationic technetium(I) complex of the formula [Tc(isocyanide)6]+ when p-fluorophenyl isocyanide is used. The products have been studied by single-crystal X-ray diffraction and spectroscopic methods, including IR and multinuclear NMR spectroscopy. DFT calculations on the different isocyanides allow the prediction of their reactivity towards electron-rich and electron-deficient metal centers by means of the empirical SADAP parameter, which has been derived from the potential energy surface of the electron density on their potentially coordinating carbon atoms.

Mixed-Isocyanide Complexes of Technetium under Steric and Electronic Control.

Reactions of the alkyl isocyanide fac-[Tc(CO)3(CNR)2Cl] complexes (2) (CNR = CNnBu or CNtBu) with the sterically encumbered isocyanide CNp-FArDarF2 [DArF = 3,5-(CF3)2C6H3] allow a selective exchange of the carbonyl ligands of 2 and the isolation of the mixed-isocyanide complexes mer,trans-[Tc(CNp-FArDarF2)3(CNR)2Cl] (3). Depending on the steric requirements of the residues R, the remaining chlorido ligand can be replaced by another isocyanide ligand. Cationic complexes such as mer-[Tc(CNp-FArDarF2)3(CNnBu)3]+ (4a) or mer,trans-[Tc(CNp-FArDarF2)3(CNnBu)2(CNtBu)]+ (6) have been prepared in this way and isolated as their PF6- salts. mer,trans-[Tc(CNp-FArDarF2)3(CNnBu)2(CNtBu)](PF6) represents to the best of our knowledge the first transition-metal complex with three different isocyanides in its coordination sphere. Since the degree of the ligand exchange seems to be controlled both by the electronic and steric measures of the incoming isocyanides, we undertook similar reactions with the sterically less demanding p-fluorophenyl isocyanide, CNPhpF, which indeed readily led to the hexakis(isocyanide)technetium(I) cation through an exchange of all ligands in the staring materials [Tc2(CO)6(µ-Cl)3]- or fac-[Tc(CO)3(CNR)2Cl]. The influence of the substituents at the isocyanide ligands in such reactions has been reasoned with the density functional theory-derived electrostatic potential at the accessible surface of the corresponding isocyanide carbon atoms.

Calix[4]arene-Analogous Technetium Supramolecules.

Calix[4]arene-analogous technetium supramolecules (1 and 2) were assembled using (NBu4)[Tc2(µ-Cl)3(CO)6] and neutral flexible bidentate nitrogen-donor ligands (L1 and L2) consisting of four arene units covalently joined via methylene units. The neutral homoleptic technetium macrocycles adopt a partial cone/cone-shaped conformation in the solid state. These supramolecules are the first example of fac-[Tc(CO)3]+ core-based metallocalix[4]arenes and second example of fac-[Tc(CO)3]+ core-based metallomacrocycles. Structurally similar fac-[Re(CO)3]+ core-based macrocycles (3 and 4) were also prepared using [Re(CO)5X] (where X = Cl or Br) and L1 or L2. The products were characterized spectroscopically and by X-ray analysis.